Baldor PCL3514M Product Information Sheet
Product Information Packet
PCL3514M
1.5HP,1725RPM,1PH,60HZ,56C,3535LC,TEFC
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: PCL3514M - 1.5HP,1725RPM,1PH,60HZ,56C,3535LC,TEFC
Part Detail
Revision: AW Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGY860 CD Diagram: CD0016A02 Mfg Plant:
Mech. Spec: 35K358 Layout: 35LYK358 Poles: 04 Created Date:
Base: RG Eff. Date: 12-03-2018 Leads: 7#18,1#14 #4TH
Specs
Catalog Number: PCL3514M
Enclosure: TEFC
Frame: 56C
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 7 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3535LC
Mounting Arrangement: F1
Power Factor: 98
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Current @ Voltage: 14.000 A @ 115.0 V
Shaft Rotation: Reversible
Page 2 of 9
Product Information Packet: PCL3514M - 1.5HP,1725RPM,1PH,60HZ,56C,3535LC,TEFC
6.000 A @ 230.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Manual Thermal Overload
Winding Thermal 1 Location: KO
Winding Thermal 2: None
Page 3 of 9
Loading...