Baldor PCL1319M Product Information Sheet

Product Information Packet

PCL1319M

1.5HP,1725RPM,1PH,60HZ,56C,3528LC,OPEN

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: PCL1319M - 1.5HP,1725RPM,1PH,60HZ,56C,3528LC,OPEN

Part Detail

Revision: AJ Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGY725 CD Diagram: CD0320 Mfg Plant:
Mech. Spec: 35K267 Layout: 35LYK267 Poles: 04 Created Date:
Base: RG Eff. Date: 04-10-2015 Leads: 4#16 A&J,2#18 B PH,1#14 #4TH

Specs

Catalog Number: PCL1319M
Enclosure: ODP
Frame: 56C
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 14.000 A @ 115.0 V

KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 16 AWG, A&J
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3528LC
Mounting Arrangement: F1
Power Factor: 94
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible

7.000 A @ 230.0 V

Shaft Slinger Indicator: No Slinger

Page 2 of 10

Product Information Packet: PCL1319M - 1.5HP,1725RPM,1PH,60HZ,56C,3528LC,OPEN

Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter

Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Manual Thermal Overload
Winding Thermal 1 Location: SK
Winding Thermal 2: None

Page 3 of 10