Baldor PCL1317M Product Information Sheet
Product Information Packet
PCL1317M
2HP,3450RPM,1PH,60HZ,56C,3524LC,OPEN,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: PCL1317M - 2HP,3450RPM,1PH,60HZ,56C,3524LC,OPEN,F1
Part Detail
Revision: S Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGY685 CD Diagram: CD0320 Mfg Plant:
Mech. Spec: 35T967 Layout: 35LYT967 Poles: 02 Created Date: 06-22-2007
Base: RG Eff. Date: 04-10-2015 Leads: 4#16 A&J,2#18 B PH,1#14 #4TH
Specs
Catalog Number: PCL1317M
Enclosure: ODP
Frame: 56C
Frame Material: Steel
Output @ Frequency: 2.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
115.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 17.600 A @ 115.0 V
KVA Code: F
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 16 AWG, A&J
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3524LC
Mounting Arrangement: F1
Power Factor: 95
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
8.800 A @ 230.0 V
Shaft Rotation: Reversible
Page 2 of 10
Product Information Packet: PCL1317M - 2HP,3450RPM,1PH,60HZ,56C,3524LC,OPEN,F1
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Manual Thermal Overload
Winding Thermal 1 Location: KO
Winding Thermal 2: None
Page 3 of 10
Loading...