Baldor MVM3545D Product Information Sheet

Product Information Packet

MVM3545D

.75KW,3450RPM,3PH,60HZ,D80D,3416M,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: MVM3545D - .75KW,3450RPM,3PH,60HZ,D80D,3416M,TEFC

Part Detail

Revision: N Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WG0282 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 34H339 Layout: 34LYH339 Poles: 02 Created Date:
Base: N Eff. Date: 03-08-2016 Leads: 9#18

Specs

Catalog Number: MVM3545D
Enclosure: TEFC
Frame: D80D
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: N
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3416M
Mounting Arrangement: F2
Power Factor: 71
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: D-Flange
Pulley Shaft Indicator: Tapped & Key

Current @ Voltage: 1.800 A @ 460.0 V

Rodent Screen: None

Page 2 of 10

Product Information Packet: MVM3545D - .75KW,3450RPM,3PH,60HZ,D80D,3416M,TEFC

3.600 A @ 230.0 V

4.100 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Frame Prefix: D
Front Face Code: Standard

Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: IEC
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor

Page 3 of 10