Baldor MVM3461C Product Information Sheet

Product Information Packet

MVM3461C

.37KW,1725RPM,3PH,60HZ,D71C,3320M,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: MVM3461C - .37KW,1725RPM,3PH,60HZ,D71C,3320M,TEFC

Part Detail

Revision: AP Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 33WG0673 CD Diagram: CD0005A05 Mfg Plant:
Mech. Spec: 33-1922 Layout: 33LY1922 Poles: 04 Created Date: 06-25-2007
Base: N Eff. Date: 01-17-2019 Leads: 9#18

Specs

Catalog Number: MVM3461C
Enclosure: TEFC
Frame: D71C
Frame Material: Steel
Output @ Frequency: .500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ

208.0 V @ 60 HZ

Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 1.200 A @ 460.0 V

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: ­Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3320M
Mounting Arrangement: F2
Power Factor: 54
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

2.400 A @ 230.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: MVM3461C - .37KW,1725RPM,3PH,60HZ,D71C,3320M,TEFC

2.600 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Feedback Signal: NONE
Frame Prefix: D
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: IEC
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10