Baldor MVM3458D Product Information Sheet

Product Information Packet

MVM3458D

.25KW,1725RPM,3PH,60HZ,D71D,3320M,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: MVM3458D - .25KW,1725RPM,3PH,60HZ,D71D,3320M,TEFC

Part Detail

Revision: AP Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 33WG0675 CD Diagram: CD0005A05 Mfg Plant:
Mech. Spec: 33E138 Layout: 33LYE138 Poles: 04 Created Date: 06-25-2007
Base: N Eff. Date: 03-04-2020 Leads: 9#18

Specs

Catalog Number: MVM3458D
Enclosure: TEFC
Frame: D71D
Frame Material: Steel
Output @ Frequency: .330 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ

Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: .700 A @ 460.0 V

1.400 A @ 230.0 V

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: ­Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3320M
Mounting Arrangement: F2
Power Factor: 58
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: D-Flange
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

1.700 A @ 208.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: MVM3458D - .25KW,1725RPM,3PH,60HZ,D71D,3320M,TEFC

Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Feedback Signal: NONE
Frame Prefix: D
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: IEC
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10