Baldor MM3710 Product Information Sheet

Product Information Packet

MM3710

5.5KW,1770RPM,3PH,60HZ,D132S,3732M,TEFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: MM3710 - 5.5KW,1770RPM,3PH,60HZ,D132S,3732M,TEFC

Part Detail

Revision: B Status: NLA/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGS150 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37E617 Layout: 37LYE617 Poles: 04 Created Date: 10-04-2006
Base: RG Eff. Date: 11-23-2009 Leads: 9#14

Specs

Catalog Number: MM3710
Enclosure: TEFC
Frame: D132S
Output @ Frequency: 5.500 KW @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ

208.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 10.100 A @ 460.0 V

Insulation Class: F
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3731M
Mounting Arrangement: B3
Power Factor: 77
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None
Shaft Extension Location: Pulley End

20.200 A @ 230.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: MM3710 - 5.5KW,1770RPM,3PH,60HZ,D132S,3732M,TEFC

22.000 A @ 208.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Frame Prefix: D
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: IEC
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10