
Product Information Packet
M74154T-4
125/150 CHP,1480/1780RPM,3PH,50/61HZ,445
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: M74154T-4 - 125/150 CHP,1480/1780RPM,3PH,50/61HZ,445
Part Detail
Revision: S Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 18WGX176 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 18J066 Layout: 18LYJ066 Poles: 04 Created Date:
Base: RG Eff. Date: 04-09-2009 Leads: 3#2
Specs
Catalog Number: M74154T-4
Enclosure: TEFC
Frame: 445T
Frame Material: Iron
Output @ Frequency: 150.000 HP @ 60 HZ
125.000 HP @ 50 HZ
Synchronous Speed @ Frequency: 1500 RPM @ 50 HZ
1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
380.0 V @ 50 HZ
XP Division: Not Applicable
Agency Approvals: UL
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 2 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1876M
Mounting Arrangement: F1
Power Factor: 88
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Blower: None
Shaft Extension Location: Pulley End
Page 2 of 11

Product Information Packet: M74154T-4 - 125/150 CHP,1480/1780RPM,3PH,50/61HZ,445
Current @ Voltage: 167.000 A @ 460.0 V
168.000 A @ 380.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
XP Temp Code: T4
Page 3 of 11

Product Information Packet: M74154T-4 - 125/150 CHP,1480/1780RPM,3PH,50/61HZ,445
Nameplate NP0978XP
NO. TEMP CODE T4
SPEC. 18J066X176H1 DE BRG 6319
CAT.NO. M74154T-4 ODE BRG 6314
HP 150//125 GREASE POLYREX EM
VOLTS 460//380 MOTOR WEIGHT 1450
AMPS 167//168 NEMA-NOM-EFF 95
RPM 1780//1480 FL PF 88
CYCLE 60//50 PH 3 CL B FRAME 445T
SER.F. 1.00 DES B CODE G CC
SER. BLANK
RATING 40C AMB-CONT
USABLE AT 208V
Page 4 of 11