Page 1
Product Information Packet
M7310T-I
60//50HP,3550//2950RPM,3PH,60//50HZ,364T
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Page 2
Product Information Packet: M7310T-I - 60//50HP,3550//2950RPM,3PH,60//50HZ,364T
Part Detail
Revision: B Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 14WGW891 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 14S020 Layout: 14LYS020 Poles: 02 Created Date: 12-10-2007
Base: RG Eff. Date: 09-29-2009 Leads: 9#6
Specs
Catalog Number: M7310T-I
Frame: 364TS
Frame Material: Iron
Output @ Frequency: 50.000 HP @ 50 HZ
60.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
3000 RPM @ 50 HZ
Voltage @ Frequency: 380.0 V @ 50 HZ
230.0 V @ 60 HZ
190.0 V @ 50 HZ
460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA
UL
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: Flying Leads
Base Indicator: Rigid
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 6 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1444M
Mounting Arrangement: F1
Power Factor: 90
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Bearing Grease Type: Polyrex EM (-20F +300F)
RoHS Status: ROHS COMPLIANT
Page 2 of 7
Page 3
Product Information Packet: M7310T-I - 60//50HP,3550//2950RPM,3PH,60//50HZ,364T
Blower: None
Current @ Voltage: 68.000 A @ 380.0 V
67.000 A @ 460.0 V
136.000 A @ 190.0 V
134.000 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 7
Page 4
Product Information Packet: M7310T-I - 60//50HP,3550//2950RPM,3PH,60//50HZ,364T
AC Induction Motor Performance Data
Record # 26006 - Typical performance - not guaranteed values
Winding: 14WGW891-R007 Type: 1444M Enclosure: XPFC
Nameplate Data
460 V, 60 Hz:
High Voltage Connection
Rated Output (HP) 60//50 Full Load Torque 88.6 LB-FT
Volts 230/460//190/380 Start Configuration direct on line
Full Load Amps 134/67//136/68 Breakdown Torque 263 LB-FT
R.P.M. 3550//2950 Pull-up Torque 98.2 LB-FT
Hz 60//50 Phase 3 Locked-rotor Torque 122 LB-FT
NEMA Design Code B KVA Code G Starting Current 448 A
Service Factor (S.F.) 1.15 No-load Current 16.8 A
NEMA Nom. Eff. 93 Power Factor 90 LinelineRes.@25ºC 0.1035Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 61°C
S.F. Amps Temp. Rise @ S.F. Load 72°C
Locked-rotor Power Factor 23
Rotor inertia 5.75 LB-FT2
Load Characteristics 460 V, 60 Hz, 60 HP
% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 69 84 88 90 90 90 90
Efficiency 86.1 91.4 92.8 93 92.7 92.1 92.8
Speed 3588 3577 3566 3554 3542 3528 3547
Line amperes 23.63 36.6 51.5 67 84.1 102 77.3
Page 4 of 7
Page 5
Product Information Packet: M7310T-I - 60//50HP,3550//2950RPM,3PH,60//50HZ,364T
Performance Graph at 460V, 60Hz, 60.0HP Typical performance - Not guaranteed values
Page 5 of 7
Page 6
Product Information Packet: M7310T-I - 60//50HP,3550//2950RPM,3PH,60//50HZ,364T
Page 6 of 7
Page 7
Product Information Packet: M7310T-I - 60//50HP,3550//2950RPM,3PH,60//50HZ,364T
Page 7 of 7
Loading...