Baldor M7174T-I Product Information Sheet
Product Information Packet
M7174T-I
10//7.5HP,3480//2880RPM,3PH,60//50HZ,215
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: M7174T-I - 10//7.5HP,3480//2880RPM,3PH,60//50HZ,215
Part Detail
Revision: M Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 07WGW910 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 07J231 Layout: 07LYJ231 Poles: 02 Created Date: 12-07-2007
Base: RG Eff. Date: 09-22-2015 Leads: 9#14
Specs
Catalog Number: M7174T-I
Frame: 215T
Frame Material: Iron
Output @ Frequency: 7.500 HP @ 50 HZ
10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
3000 RPM @ 50 HZ
Voltage @ Frequency: 380.0 V @ 50 HZ
230.0 V @ 60 HZ
190.0 V @ 50 HZ
460.0 V @ 60 HZ
XP Class and Group: CLI GP C,D
XP Division: Division I
Agency Approvals: CSA
UL
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 0735M
Mounting Arrangement: F1
Power Factor: 90
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Base Indicator: Rigid
RoHS Status: ROHS COMPLIANT
Page 2 of 10
Product Information Packet: M7174T-I - 10//7.5HP,3480//2880RPM,3PH,60//50HZ,215
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 23.000 A @ 230.0 V
21.600 A @ 190.0 V
11.500 A @ 460.0 V
10.800 A @ 380.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 10
Loading...