
Product Information Packet
M7090T-I-5
100HP,1775RPM,3PH,60HZ,405T,X1676M,XPFC
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: M7090T-I-5 - 100HP,1775RPM,3PH,60HZ,405T,X1676M,XPFC
Part Detail
Revision: M Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 16WGW717 CD Diagram: CD0006 Mfg Plant:
Mech. Spec: 16M014 Layout: 16LYM014 Poles: 04 Created Date:
Base: RG Eff. Date: 12-13-2010 Leads: 3#6
Specs
Catalog Number: M7090T-I-5
Enclosure: TEFC
Frame: 405T
Frame Material: Iron
Output @ Frequency: 100.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 575.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA
UL
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 87.000 A @ 575.0 V
Design Code: B
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 6 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1676M
Mounting Arrangement: F1
Power Factor: 91
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Drip Cover: No Drip Cover
Shaft Rotation: Reversible
Page 2 of 7

Product Information Packet: M7090T-I-5 - 100HP,1775RPM,3PH,60HZ,405T,X1676M,XPFC
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
XP Temp Code: T3C
Page 3 of 7

Product Information Packet: M7090T-I-5 - 100HP,1775RPM,3PH,60HZ,405T,X1676M,XPFC
AC Induction Motor Performance Data
Record # 4690 - Typical performance - not guaranteed values
Winding: 16WGW717-R002 Type: 1676M Enclosure: TEFC
Nameplate Data
575 V, 60 Hz:
Single Voltage Motor
Rated Output (HP) 100 Full Load Torque 295 LB-FT
Volts 575 Start Configuration direct on line
Full Load Amps 87 Breakdown Torque 916 LB-FT
R.P.M. 1775 Pull-up Torque 319 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 366 LB-FT
NEMA Design Code B KVA Code G Starting Current 608 A
Service Factor (S.F.) 1.15 No-load Current 26.1 A
NEMA Nom. Eff. 94.5 Power Factor 91 LinelineRes.@25ºC 0.0777Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 63°C
S.F. Amps Temp. Rise @ S.F. Load 75°C
Locked-rotor Power Factor 26
Rotor inertia 25.9 LB-FT2
Load Characteristics 575 V, 60 Hz, 100 HP
% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 62 82 89 90 91 90 91
Efficiency 91 94.2 94.9 94.9 94.6 93.9 94.7
Speed 1794 1790 1787 1783 1779 1773 1781
Line amperes 33 48.3 66.7 87.5 109 132 100.4
Page 4 of 7

Product Information Packet: M7090T-I-5 - 100HP,1775RPM,3PH,60HZ,405T,X1676M,XPFC
Performance Graph at 575V, 60Hz, 100.0HP Typical performance - Not guaranteed values
Page 5 of 7

Product Information Packet: M7090T-I-5 - 100HP,1775RPM,3PH,60HZ,405T,X1676M,XPFC
Page 6 of 7

Product Information Packet: M7090T-I-5 - 100HP,1775RPM,3PH,60HZ,405T,X1676M,XPFC
Page 7 of 7