Baldor M7090T Product Information Sheet

Product Information Packet

M7090T

75/100HP,1475/1780RPM,3PH,50/60HZ,405T

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: M7090T - 75/100HP,1475/1780RPM,3PH,50/60HZ,405T

Part Detail

Revision: K Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 16WGW674 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 16K063 Layout: 16LYK063 Poles: 04 Created Date:
Base: RG Eff. Date: 12-13-2010 Leads: 9#4

Specs

Catalog Number: M7090T
Enclosure: TEFC
Frame: 405T
Frame Material: Iron
Output @ Frequency: 100.000 HP @ 60 HZ

75.000 HP @ 50 HZ

Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ

1500 RPM @ 50 HZ

Voltage @ Frequency: 230.0 V @ 60 HZ

190.0 V @ 50 HZ

460.0 V @ 60 HZ

380.0 V @ 50 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UL
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None

Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 4 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1676M
Mounting Arrangement: F1
Power Factor: 87
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard

Base Indicator: Rigid

Pulley Shaft Indicator: Standard

Page 2 of 7

Product Information Packet: M7090T - 75/100HP,1475/1780RPM,3PH,50/60HZ,405T

Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 244.000 A @ 208.0 V

226.000 A @ 230.0 V

208.000 A @ 190.0 V

113.000 A @ 460.0 V

104.000 A @ 380.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK

Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
XP Temp Code: T4

Page 3 of 7