Product Information Packet
M7086T
50/60HP,980/1185RPM,3PH,50/60HZ,404T
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: M7086T - 50/60HP,980/1185RPM,3PH,50/60HZ,404T
Part Detail
Revision: K Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 16WGW384 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 16E25 Layout: 16LYE025 Poles: 06 Created Date:
Base: RG Eff. Date: 12-03-2010 Leads: 9#6
Specs
Catalog Number: M7086T
Enclosure: TEFC
Frame: 404T
Frame Material: Iron
Output @ Frequency: 50.000 HP @ 50 HZ
60.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
1000 RPM @ 50 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
190.0 V @ 50 HZ
460.0 V @ 60 HZ
380.0 V @ 50 HZ
XP Division: Not Applicable
Agency Approvals: UL
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 6 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1662M
Mounting Arrangement: F1
Power Factor: 86
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Base Indicator: Rigid
Pulley Shaft Indicator: Standard
Page 2 of 7
Product Information Packet: M7086T - 50/60HP,980/1185RPM,3PH,50/60HZ,404T
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 71.000 A @ 380.0 V
70.000 A @ 460.0 V
152.000 A @ 208.0 V
142.000 A @ 190.0 V
140.000 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
XP Temp Code: T4
Page 3 of 7
Product Information Packet: M7086T - 50/60HP,980/1185RPM,3PH,50/60HZ,404T
AC Induction Motor Performance Data
Record # 15890 - Typical performance - not guaranteed values
Winding: 16WGW384-R003 Type: 1662M Enclosure: XPFC
Nameplate Data
380 V, 50 Hz:
High Voltage Connection
Rated Output (HP) 60//50 Full Load Torque 267 LB-FT
Volts 230/460//190/380 Start Configuration direct on line
Full Load Amps 140/70//142/71 Breakdown Torque 694 LB-FT
R.P.M. 1185//980 Pull-up Torque 298 LB-FT
Hz 60//50 Phase 3 Locked-rotor Torque 370 LB-FT
NEMA Design Code B KVA Code G Starting Current 432 A
Service Factor (S.F.) 1 No-load Current 22.1 A
NEMA Nom. Eff. 93.6 Power Factor 86 LinelineRes.@25ºC 0.125Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 55°C
S.F. Amps Temp. Rise @ S.F. Load 67°C
Locked-rotor Power Factor 34
Rotor inertia 30.1 LB-FT2
Load Characteristics 380 V, 50 Hz, 50 HP
% of Rated Load 25 50 75 100 125 150
Power Factor 58 78 84 86 86 85
Efficiency 88.8 92.7 93.4 93.3 92.6 91.6
Speed 996 992 989 985 981 977
Line amperes 27.6 39.6 54.2 70.7 88.4 109
Page 4 of 7
Product Information Packet: M7086T - 50/60HP,980/1185RPM,3PH,50/60HZ,404T
Performance Graph at 380V, 50Hz, 50.0HP Typical performance - Not guaranteed values
Page 5 of 7
Product Information Packet: M7086T - 50/60HP,980/1185RPM,3PH,50/60HZ,404T
Page 6 of 7
Product Information Packet: M7086T - 50/60HP,980/1185RPM,3PH,50/60HZ,404T
Page 7 of 7
Loading...