Baldor M7085T-I Product Information Sheet
Product Information Packet
M7085T-I
50//40HP,1180//975RPM,3PH,60//50HZ,365T
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: M7085T-I - 50//40HP,1180//975RPM,3PH,60//50HZ,365T
Part Detail
Revision: C Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 14WGW769 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 14R019 Layout: 14LYR019 Poles: 06 Created Date: 12-10-2007
Base: RG Eff. Date: 09-29-2009 Leads: 9#6
Specs
Catalog Number: M7085T-I
Frame: 365T
Frame Material: Iron
Output @ Frequency: 50.000 HP @ 60 HZ
40.000 HP @ 50 HZ
Synchronous Speed @ Frequency: 1000 RPM @ 50 HZ
1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
380.0 V @ 50 HZ
190.0 V @ 50 HZ
230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UL
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 6 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1456M
Mounting Arrangement: F1
Power Factor: 83
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Bearing Grease Type: Polyrex EM (-20F +300F)
RoHS Status: ROHS COMPLIANT
Page 2 of 7
Product Information Packet: M7085T-I - 50//40HP,1180//975RPM,3PH,60//50HZ,365T
Blower: None
Current @ Voltage: 120.000 A @ 190.0 V
122.000 A @ 230.0 V
130.000 A @ 208.0 V
60.000 A @ 380.0 V
61.000 A @ 460.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 7
Loading...