Page 1
Product Information Packet
M7084T-I
40//30HP,1180//980RPM,3PH,60//50HZ,364T
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Page 2
Product Information Packet: M7084T-I - 40//30HP,1180//980RPM,3PH,60//50HZ,364T
Part Detail
Revision: C Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 14WGX145 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 14R019 Layout: 14LYR019 Poles: 06 Created Date: 12-10-2007
Base: RG Eff. Date: 09-29-2009 Leads: 9#6
Specs
Catalog Number: M7084T-I
Frame: 364T
Frame Material: Iron
Output @ Frequency: 40.000 HP @ 60 HZ
30.000 HP @ 50 HZ
Synchronous Speed @ Frequency: 1000 RPM @ 50 HZ
1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
380.0 V @ 50 HZ
190.0 V @ 50 HZ
230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UL
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 6 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1462M
Mounting Arrangement: F1
Power Factor: 82
Product Family: General Purpose
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Bearing Grease Type: Polyrex EM (-20F +300F)
RoHS Status: ROHS COMPLIANT
Page 2 of 7
Page 3
Product Information Packet: M7084T-I - 40//30HP,1180//980RPM,3PH,60//50HZ,364T
Blower: None
Current @ Voltage: 105.000 A @ 208.0 V
45.000 A @ 380.0 V
49.000 A @ 460.0 V
90.000 A @ 190.0 V
98.000 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 7
Page 4
Product Information Packet: M7084T-I - 40//30HP,1180//980RPM,3PH,60//50HZ,364T
AC Induction Motor Performance Data
Record # 26009 - Typical performance - not guaranteed values
Winding: 14WGX145-R004 Type: 1462M Enclosure: XPFC
Nameplate Data
460 V, 60 Hz:
High Voltage Connection
Rated Output (HP) 40//30 Full Load Torque 178 LB-FT
Volts 230/460//190/380 Start Configuration direct on line
Full Load Amps 98/49//90/45 Breakdown Torque 476 LB-FT
R.P.M. 1180//980 Pull-up Torque 224 LB-FT
Hz 60//50 Phase 3 Locked-rotor Torque 257 LB-FT
NEMA Design Code B KVA Code G Starting Current 316 A
Service Factor (S.F.) 1.15 No-load Current 18.4 A
NEMA Nom. Eff. 93 Power Factor 82 LinelineRes.@25ºC 0.161Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 59°C
S.F. Amps Temp. Rise @ S.F. Load 70°C
Locked-rotor Power Factor 32
Rotor inertia 17.7 LB-FT2
Load Characteristics 460 V, 60 Hz, 40 HP
% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 50 70 79 82 84 83 83
Efficiency 86.9 91.8 93.1 93.3 92.9 92.3 93.1
Speed 1197 1193 1189 1185 1179 1174 1181
Line amperes 21.9 29.3 38.5 49 60.5 73.1 55.9
Page 4 of 7
Page 5
Product Information Packet: M7084T-I - 40//30HP,1180//980RPM,3PH,60//50HZ,364T
Performance Graph at 460V, 60Hz, 40.0HP Typical performance - Not guaranteed values
Page 5 of 7
Page 6
Product Information Packet: M7084T-I - 40//30HP,1180//980RPM,3PH,60//50HZ,364T
Page 6 of 7
Page 7
Product Information Packet: M7084T-I - 40//30HP,1180//980RPM,3PH,60//50HZ,364T
Page 7 of 7
Loading...