Baldor M7082T Product Information Sheet

Product Information Packet

M7082T

20/25HP,975/1180RPM,3PH,50/60HZ,324T

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: M7082T - 20/25HP,975/1180RPM,3PH,50/60HZ,324T

Part Detail

Revision: J Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 12WGX418 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 12L18 Layout: 12LYL018 Poles: 06 Created Date:
Base: RG Eff. Date: 07-22-2010 Leads: 9#8

Specs

Catalog Number: M7082T
Frame: 324T
Frame Material: Iron
Output @ Frequency: 20.000 HP @ 50 HZ

25.000 HP @ 60 HZ

Synchronous Speed @ Frequency: 1000 RPM @ 50 HZ

1200 RPM @ 60 HZ

Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ

380.0 V @ 50 HZ

190.0 V @ 50 HZ
XP Division: Not Applicable
Agency Approvals: UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid

Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 8 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1252M
Mounting Arrangement: F1
Power Factor: 81
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard

Bearing Grease Type: Polyrex EM (-20F +300F)

Pulley Shaft Indicator: Standard

Page 2 of 10

Product Information Packet: M7082T - 20/25HP,975/1180RPM,3PH,50/60HZ,324T

Blower: None
Current @ Voltage: 30.500 A @ 380.0 V

31.000 A @ 460.0 V

61.000 A @ 190.0 V

62.000 A @ 230.0 V

68.000 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK

Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
XP Temp Code: T3C

Page 3 of 10