Baldor M7070T Product Information Sheet
Product Information Packet
M7070T
10HP,1770RPM,3PH,60HZ,215T,3740M,XPFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: M7070T - 10HP,1770RPM,3PH,60HZ,215T,3740M,XPFC,F1
Part Detail
Revision: L Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGS275 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37H239 Layout: 37LYH239 Poles: 04 Created Date: 07-13-2007
Base: RG Eff. Date: 03-08-2016 Leads: 9#14
Specs
Catalog Number: M7070T
Enclosure: TEFC
Frame: 215T
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: CLI GP D; CLII GP F,G
XP Division: Division I
Agency Approvals: CSA
UL
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 13.500 A @ 460.0 V
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3740M
Mounting Arrangement: F1
Power Factor: 77
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
27.000 A @ 230.0 V
Shaft Rotation: Reversible
Page 2 of 10
Product Information Packet: M7070T - 10HP,1770RPM,3PH,60HZ,215T,3740M,XPFC,F1
27.700 A @ 208.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 10
Loading...