Baldor M7044T Product Information Sheet

Product Information Packet

M7044T

3/5HP,1460/1750RPM,3PH,50/60HZ,184T

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: M7044T - 3/5HP,1460/1750RPM,3PH,50/60HZ,184T

Part Detail

Revision: S Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGX864 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 36E145 Layout: 36LYE145 Poles: 04 Created Date:
Base: RG Eff. Date: 09-27-2016 Leads: 9#16

Specs

Catalog Number: M7044T
Enclosure: TEFC
Frame: 184T
Output @ Frequency: 5.000 HP @ 60 HZ

3.000 HP @ 50 HZ

Synchronous Speed @ Frequency: 1500 RPM @ 50 HZ

1800 RPM @ 60 HZ

Voltage @ Frequency: 460.0 V @ 60 HZ

380.0 V @ 50 HZ

190.0 V @ 50 HZ

230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid

Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3638M
Mounting Arrangement: F1
Power Factor: 80
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard

Bearing Grease Type: Polyrex EM (-20F +300F)

Rodent Screen: None

Page 2 of 10

Product Information Packet: M7044T - 3/5HP,1460/1750RPM,3PH,50/60HZ,184T

Blower: None
Current @ Voltage: 10.600 A @ 190.0 V

13.400 A @ 230.0 V

14.000 A @ 208.0 V

5.300 A @ 380.0 V

6.700 A @ 460.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard

Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 10