Baldor M7041T Product Information Sheet

Product Information Packet
M7041T
2//1.5HP,960/1160RPM,3PH,50/60HZ,184T
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: M7041T - 2//1.5HP,960/1160RPM,3PH,50/60HZ,184T
Part Detail
Revision: U Status: INA/A Change #: Proprietary: No Type: AC Elec. Spec: 36WGY788 CD Diagram: CD0005 Mfg Plant: Mech. Spec: 36N004 Layout: 36LYN004 Poles: 06 Created Date: Base: RG Eff. Date: 01-13-2011 Leads: 9#16
Specs
Catalog Number: M7041T Enclosure: XPFC Frame: 184T Output @ Frequency: 2.000 HP @ 60 HZ
1.500 HP @ 50 HZ Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ Voltage @ Frequency: 460.0 V @ 60 HZ
190.0 V @ 50 HZ
230.0 V @ 60 HZ
380.0 V @ 50 HZ XP Class and Group: None XP Division: Not Applicable Agency Approvals: UL
CSA Auxillary Box: No Auxillary Box Auxillary Box Lead Termination: None Base Indicator: Rigid
Front Shaft Indicator: None Heater Indicator: No Heater Insulation Class: B Inverter Code: Not Inverter KVA Code: J Lifting Lugs: No Lifting Lugs Locked Bearing Indicator: No Locked Bearing Motor Lead Quantity/Wire Size: 9 @ 16 AWG Motor Lead Exit: Ko Box Motor Lead Termination: Flying Leads Motor Type: 3636M Mounting Arrangement: F1 Power Factor: 67 Product Family: General Purpose Pulley End Bearing Type: Ball Pulley Face Code: Standard Pulley Shaft Indicator: Standard
Bearing Grease Type: Polyrex EM (-20F +300F)
Rodent Screen: None
Product Information Packet: M7041T - 2//1.5HP,960/1160RPM,3PH,50/60HZ,184T
Blower: None Current @ Voltage: 3.000 A @ 380.0 V
3.300 A @ 460.0 V
6.000 A @ 190.0 V
6.600 A @ 230.0 V
6.800 A @ 208.0 V Design Code: B Drip Cover: No Drip Cover Duty Rating: CONT Electrically Isolated Bearing: Not Electrically Isolated Feedback Device: NO FEEDBACK Front Face Code: Standard
Shaft Extension Location: Pulley End Shaft Ground Indicator: No Shaft Grounding Shaft Rotation: Reversible Shaft Slinger Indicator: No Slinger Speed Code: Single Speed Motor Standards: NEMA Starting Method: Direct on line Thermal Device - Bearing: None Thermal Device - Winding: Normally Closed Thermostat Vibration Sensor Indicator: No Vibration Sensor Winding Thermal 1: None Winding Thermal 2: None XP Temp Code: T3C
+ 7 hidden pages