Baldor M7036T Product Information Sheet
Product Information Packet
M7036T
2//3HP,970//1165RPM,3PH,50//60HZ,213T,37
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: M7036T - 2//3HP,970//1165RPM,3PH,50//60HZ,213T,37
Part Detail
Revision: H Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGT975 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37H239 Layout: 37LYH239 Poles: 06 Created Date: 08-25-2006
Base: RG Eff. Date: 08-31-2009 Leads: 9#14
Specs
Catalog Number: M7036T
Enclosure: TEFC
Frame: 213T
Output @ Frequency: 3.000 HP @ 60 HZ
2.000 HP @ 50 HZ
Synchronous Speed @ Frequency: 1000 RPM @ 50 HZ
1200 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
380.0 V @ 50 HZ
190.0 V @ 50 HZ
230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UL
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3728M
Mounting Arrangement: F1
Power Factor: 69
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Bearing Grease Type: Polyrex EM (-20F +300F)
Shaft Extension Location: Pulley End
Page 2 of 9
Product Information Packet: M7036T - 2//3HP,970//1165RPM,3PH,50//60HZ,213T,37
Blower: None
Current @ Voltage: 4.100 A @ 380.0 V
4.600 A @ 460.0 V
8.200 A @ 190.0 V
9.200 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 9
Loading...