Baldor M7031A Product Information Sheet
Product Information Packet
M7031A
.75HP,1140RPM,3PH,60HZ,56,X3524M,XPFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: M7031A - .75HP,1140RPM,3PH,60HZ,56,X3524M,XPFC,F1
Part Detail
Revision: AK Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGY025 CD Diagram: CD0007 Mfg Plant:
Mech. Spec: 35E354 Layout: 35LYE354 Poles: 06 Created Date:
Base: RG Eff. Date: 01-06-2020 Leads: 12#18
Specs
Catalog Number: M7031A
Enclosure: XPFC
Frame: 56
Frame Material: Steel
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ
460.0 V @ 60 HZ
230.0 V @ 60 HZ
XP Class and Group: CLI GP D; CLII GP F,G
XP Division: Division I
Agency Approvals: CSA
UL
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 12 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X3524M
Mounting Arrangement: F1
Power Factor: 63
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Bearing Grease Type: Polyrex EM (-20F +300F)
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 10
Product Information Packet: M7031A - .75HP,1140RPM,3PH,60HZ,56,X3524M,XPFC,F1
Blower: None
Current @ Voltage: 3.000 A @ 208.0 V
2.800 A @ 230.0 V
1.400 A @ 460.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use Eve-Not Valiid
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None
XP Temp Code: T4
Page 3 of 10
Loading...