Baldor M7026T Product Information Sheet

Product Information Packet

M7026T

2/3HP,2900/3460RPM,3PH,50/60HZ,182T

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: M7026T - 2/3HP,2900/3460RPM,3PH,50/60HZ,182T

Part Detail

Revision: Q Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGT059 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 36N004 Layout: 36LYN004 Poles: 02 Created Date:
Base: RG Eff. Date: 08-20-2009 Leads: 9#16

Specs

Catalog Number: M7026T
Enclosure: TEFC
Frame: 182T
Output @ Frequency: 3.000 HP @ 60 HZ

2.000 HP @ 50 HZ

Synchronous Speed @ Frequency: 3000 RPM @ 50 HZ

3600 RPM @ 60 HZ

Voltage @ Frequency: 460.0 V @ 60 HZ

380.0 V @ 50 HZ

190.0 V @ 50 HZ

230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid

Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3620M
Mounting Arrangement: F1
Power Factor: 91
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard

Bearing Grease Type: Polyrex EM (-20F +300F)

Rodent Screen: None

Page 2 of 10

Product Information Packet: M7026T - 2/3HP,2900/3460RPM,3PH,50/60HZ,182T

Blower: None
Current @ Voltage: 3.200 A @ 380.0 V

3.700 A @ 460.0 V

6.400 A @ 190.0 V

7.400 A @ 230.0 V

7.800 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard

Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 10