Product Information Packet
M7018T
1/1 1/2HP,2880/3450RPM,3PH,50/60HZ,143T,
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: M7018T - 1/1 1/2HP,2880/3450RPM,3PH,50/60HZ,143T,
Part Detail
Revision: U Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGR710 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35E362 Layout: 35LYE362 Poles: 02 Created Date: 06-27-2007
Base: RG Eff. Date: 02-03-2010 Leads: 9#18
Specs
Catalog Number: M7018T
Enclosure: TEFC
Frame: 143T
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
1.000 HP @ 50 HZ
Synchronous Speed @ Frequency: 3000 RPM @ 50 HZ
3600 RPM @ 60 HZ
Voltage @ Frequency: 380.0 V @ 50 HZ
460.0 V @ 60 HZ
190.0 V @ 50 HZ
230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UL
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3520M
Mounting Arrangement: F1
Power Factor: 88
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Base Indicator: Rigid
Rodent Screen: None
Page 2 of 10
Product Information Packet: M7018T - 1/1 1/2HP,2880/3450RPM,3PH,50/60HZ,143T,
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 1.800 A @ 380.0 V
2.100 A @ 460.0 V
3.600 A @ 190.0 V
4.200 A @ 230.0 V
4.400 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C
Page 3 of 10