
Product Information Packet
M4104T-9
30HP,1770RPM,3PH,60HZ,286T,1058M,TEFC,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: M4104T-9 - 30HP,1770RPM,3PH,60HZ,286T,1058M,TEFC,F1
Part Detail
Revision: D Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 10WGY734 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 10J750 Layout: 10LYJ750 Poles: 04 Created Date: 07-16-2014
Base: RG Eff. Date: 05-17-2016 Leads: 9#8
Specs
Catalog Number: M4104T-9
Enclosure: TEFC
Frame: 286T
Frame Material: Iron
Output @ Frequency: 30.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ
230.0 V @ 60 HZ
208.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: RG
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 8 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1058M
Mounting Arrangement: F1
Power Factor: 86
Product Family: WP Below Decks Marine Duty
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Current @ Voltage: 35.000 A @ 460.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 11

Product Information Packet: M4104T-9 - 30HP,1770RPM,3PH,60HZ,286T,1058M,TEFC,F1
70.000 A @ 230.0 V
76.000 A @ 208.0 V
Design Code: C
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 11

Product Information Packet: M4104T-9 - 30HP,1770RPM,3PH,60HZ,286T,1058M,TEFC,F1
Nameplate NP1261L
CAT.NO.
SPEC. 10J750Y734H2
HP 30
VOLTS 208-230/460
AMP 76-70/35
RPM 1770
FRAME 286T HZ 60 PH 3
SER.F. 1.15 CODE G DES C CLASS F
NEMA-NOM-EFF 92.4 PF 86
RATING 40C AMB-CONT
CC 010A USABLE AT 208V
DE 6311 ODE 6309
ENCL TEFC SN
Page 4 of 11