Baldor M3112-57 Product Information Sheet

Product Information Packet

M3112-57

.75HP,1425 IP23RPM,3PH,50HZ,56,3420M,O

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: M3112-57 - .75HP,1425 IP23RPM,3PH,50HZ,56,3420M,O

Part Detail

Revision: E Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WG2382 CD Diagram: CD0022 Mfg Plant:
Mech. Spec: 34F779 Layout: 34LYF779 Poles: 04 Created Date: 09-08-2011
Base: RG Eff. Date: 04-15-2020 Leads: 6#18

Specs

Catalog Number: M3112-57
Enclosure: OPEN
Frame: 56
Frame Material: Steel
Output @ Frequency: .750 HP @ 50 HZ
Synchronous Speed @ Frequency: 1500 RPM @ 50 HZ
Voltage @ Frequency: 400.0 V @ 50 HZ

230.0 V @ 50 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

WEEE
CSA

CE
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid

Insulation Class: F
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3420M
Mounting Arrangement: F1
Power Factor: 58
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Bearing Grease Type: Polyrex EM (-20F +300F)

Shaft Extension Location: Pulley End

Page 2 of 9

Product Information Packet: M3112-57 - .75HP,1425 IP23RPM,3PH,50HZ,56,3420M,O

Blower: None
Current @ Voltage: 1.900 A @ 400.0 V

3.200 A @ 230.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 9