Product Information Packet
M2583T
100HP,1185RPM,3PH,60HZ,444T,1852M,OPEN
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: M2583T - 100HP,1185RPM,3PH,60HZ,444T,1852M,OPEN
Part Detail
Revision: Q Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 18WGX017 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 18D01 Layout: 18LYD001 Poles: 06 Created Date: 04-29-2008
Base: RG Eff. Date: 04-01-2010 Leads: 9#4
Specs
Catalog Number: M2583T
Enclosure: ODP
Frame: 444T
Frame Material: Iron
Output @ Frequency: 100.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR
CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 119.000 A @ 460.0 V
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 4 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 1852M
Mounting Arrangement: F1
Power Factor: 83
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
238.000 A @ 230.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 8
Product Information Packet: M2583T - 100HP,1185RPM,3PH,60HZ,444T,1852M,OPEN
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Page 3 of 8
Product Information Packet: M2583T - 100HP,1185RPM,3PH,60HZ,444T,1852M,OPEN
Accessories
Part Number Description Multiplier
18-1202 C FACE KIT A8
18EP1600A01SP D-FLANGE KIT (FOR 88 MAX STACK ONLY) A8
Page 4 of 8
Product Information Packet: M2583T - 100HP,1185RPM,3PH,60HZ,444T,1852M,OPEN
AC Induction Motor Performance Data
Record # 5808 - Typical performance - not guaranteed values
Winding: 18WGX017-R001 Type: 1852M Enclosure: OPEN
Nameplate Data
460 V, 60 Hz:
High Voltage Connection
Rated Output (HP) 100 Full Load Torque 443 LB-FT
Volts 230/460 Start Configuration direct on line
Full Load Amps 238/119 Breakdown Torque 1095 LB-FT
R.P.M. 1185 Pull-up Torque 495 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 584 LB-FT
NEMA Design Code B KVA Code G Starting Current 695 A
Service Factor (S.F.) 1.15 No-load Current 42.3 A
NEMA Nom. Eff. 94.1 Power Factor 83 LinelineRes.@25ºC 0.0719Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 33°C
S.F. Amps Temp. Rise @ S.F. Load 43°C
Locked-rotor Power Factor 35
Rotor inertia 34.7 LB-FT2
Load Characteristics 460 V, 60 Hz, 100 HP
% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 51 72 80 83 84 83 84
Efficiency 90.9 94 94.4 94.2 93.7 92.9 93.9
Speed 1197 1194 1191 1187 1183 1178 1185
Line amperes 50.8 69.2 92.7 119.2 148.9 181.5 137
Page 5 of 8
Product Information Packet: M2583T - 100HP,1185RPM,3PH,60HZ,444T,1852M,OPEN
Performance Graph at 460V, 60Hz, 100.0HP Typical performance - Not guaranteed values
Page 6 of 8
Product Information Packet: M2583T - 100HP,1185RPM,3PH,60HZ,444T,1852M,OPEN
Page 7 of 8
Product Information Packet: M2583T - 100HP,1185RPM,3PH,60HZ,444T,1852M,OPEN
Page 8 of 8
Loading...