Baldor M2557T-4 Product Information Sheet

Page 1
Product Information Packet
M2557T-4
125HP,1185RPM,3PH,60HZ,445T,1856M,OPEN
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Page 2
Product Information Packet: M2557T-4 - 125HP,1185RPM,3PH,60HZ,445T,1856M,OPEN
Part Detail
Revision: L Status: INA/A Change #: Proprietary: No Type: AC Elec. Spec: 18WGX018 CD Diagram: CD0382 Mfg Plant: Mech. Spec: 18D01 Layout: 18LYD001 Poles: 06 Created Date: Base: RG Eff. Date: 04-01-2010 Leads: 6#6
Specs
Catalog Number: M2557T-4 Enclosure: ODP Frame: 445T Frame Material: Iron Output @ Frequency: 125.000 HP @ 60 HZ Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ Voltage @ Frequency: 460.0 V @ 60 HZ XP Division: Not Applicable Agency Approvals: UR
CSA Auxillary Box: No Auxillary Box Auxillary Box Lead Termination: None Base Indicator: Rigid Bearing Grease Type: Polyrex EM (-20F +300F) Blower: None Current @ Voltage: 151.000 A @ 460.0 V Design Code: B
Inverter Code: Not Inverter KVA Code: F Lifting Lugs: Standard Lifting Lugs Locked Bearing Indicator: Locked Bearing Motor Lead Quantity/Wire Size: 6 @ 6 AWG Motor Lead Exit: Ko Box Motor Lead Termination: Flying Leads Motor Type: 1856M Mounting Arrangement: F1 Power Factor: 83 Product Family: General Purpose Pulley End Bearing Type: Ball Pulley Face Code: Standard Pulley Shaft Indicator: Standard Rodent Screen: None Shaft Extension Location: Pulley End Shaft Ground Indicator: No Shaft Grounding
Drip Cover: No Drip Cover
Shaft Rotation: Reversible
Page 3
Product Information Packet: M2557T-4 - 125HP,1185RPM,3PH,60HZ,445T,1856M,OPEN
Duty Rating: CONT Electrically Isolated Bearing: Not Electrically Isolated Feedback Device: NO FEEDBACK Front Face Code: Standard Front Shaft Indicator: None Heater Indicator: No Heater Insulation Class: B
Shaft Slinger Indicator: No Slinger Speed Code: Single Speed Motor Standards: NEMA Starting Method: Wye Start - Delta Run Thermal Device - Bearing: None Thermal Device - Winding: None Vibration Sensor Indicator: No Vibration Sensor
Page 4
Product Information Packet: M2557T-4 - 125HP,1185RPM,3PH,60HZ,445T,1856M,OPEN
Accessories
Part Number Description Multiplier 18-1202 C FACE KIT A8 18EP1600A01SP D-FLANGE KIT (FOR 88 MAX STACK ONLY) A8
Page 5
Product Information Packet: M2557T-4 - 125HP,1185RPM,3PH,60HZ,445T,1856M,OPEN
AC Induction Motor Performance Data
Record # 5809 - Typical performance - not guaranteed values
Winding: 18WGX018-R001 Type: 1856M Enclosure: OPEN
Nameplate Data
460 V, 60 Hz:
Single Voltage Motor Rated Output (HP) 125 Full Load Torque 553 LB-FT Volts 460 Start Configuration direct on line Full Load Amps 151 Breakdown Torque 1353 LB-FT R.P.M. 1185 Pull-up Torque 650 LB-FT Hz 60 Phase 3 Locked-rotor Torque 721 LB-FT NEMA Design Code B KVA Code F Starting Current 843 A Service Factor (S.F.) 1.15 No-load Current 53.6 A NEMA Nom. Eff. 94.1 Power Factor 83 LinelineRes.@25ºC 0.0584Ω Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 39°C S.F. Amps Temp. Rise @ S.F. Load 51°C
Locked-rotor Power Factor 35
Rotor inertia 37.4 LB-FT2
Load Characteristics 460 V, 60 Hz, 125 HP
% of Rated Load 25 50 75 100 125 150 S.F. Power Factor 50 71 79 83 83 83 83 Efficiency 91.5 94.3 94.5 94.2 93.5 92.4 93.8 Speed 1197 1194 1191 1187 1183 1178 1185 Line amperes 63.8 87.5 117.3 150.6 187.9 230.4 173
Page 6
Product Information Packet: M2557T-4 - 125HP,1185RPM,3PH,60HZ,445T,1856M,OPEN
Performance Graph at 460V, 60Hz, 125.0HP Typical performance - Not guaranteed values
Page 7
Product Information Packet: M2557T-4 - 125HP,1185RPM,3PH,60HZ,445T,1856M,OPEN
Page 8
Product Information Packet: M2557T-4 - 125HP,1185RPM,3PH,60HZ,445T,1856M,OPEN
Loading...