Baldor L5026 Product Information Sheet

Product Information Packet

L5026

1HP,1140RPM,1PH,60HZ,184,X3634L,XPFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: L5026 - 1HP,1140RPM,1PH,60HZ,184,X3634L,XPFC,F1

Part Detail

Revision: AK Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WG0608 CD Diagram: CD0001 Mfg Plant:
Mech. Spec: 36N007 Layout: 36LYN007 Poles: 06 Created Date:
Base: RG Eff. Date: 01-06-2020 Leads: 6#16

Specs

Catalog Number: L5026
Enclosure: XPFC
Frame: 184
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1200 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

208.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: CLI GP D; CLII GP F,G
XP Division: Division I
Agency Approvals: UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X3634L
Mounting Arrangement: F1
Power Factor: 67
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End

Blower: None

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: L5026 - 1HP,1140RPM,1PH,60HZ,184,X3634L,XPFC,F1

Current @ Voltage: 14.000 A @ 115.0 V

7.000 A @ 230.0 V

7.400 A @ 208.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 10