Baldor L5023A Product Information Sheet

Product Information Packet

L5023A

1HP,1725RPM,1PH,60HZ,56,X3524L,XPFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: L5023A - 1HP,1725RPM,1PH,60HZ,56,X3524L,XPFC,F1

Part Detail

Revision: AB Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGY190 CD Diagram: CD0008 Mfg Plant:
Mech. Spec: 35G485 Layout: 35LYG485 Poles: 04 Created Date:
Base: RG Eff. Date: 07-22-2015 Leads: 3#16 A PH,3#18 B&J,1#14 #4TH

Specs

Catalog Number: L5023A
Enclosure: XPFC
Frame: 56
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: CLI GP D
XP Division: Division I
Agency Approvals: UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 3 @ 16 AWG, A PH
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X3524L
Mounting Arrangement: F1
Power Factor: 73
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Current @ Voltage: 13.000 A @ 115.0 V

Shaft Rotation: Reversible

Page 2 of 10

Product Information Packet: L5023A - 1HP,1725RPM,1PH,60HZ,56,X3524L,XPFC,F1

6.500 A @ 230.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None
XP Temp Code: T2C

Page 3 of 10