Baldor KM3006 Product Information Sheet

Product Information Packet

KM3006

.33HP,3450RPM,3PH,60HZ,56C,3410M,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: KM3006 - .33HP,3450RPM,3PH,60HZ,56C,3410M,OPEN,F1

Part Detail

Revision: K Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGY170 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 34F012 Layout: 34LYF012 Poles: 02 Created Date:
Base: N Eff. Date: 01-21-2015 Leads: 9#18

Specs

Catalog Number: KM3006
Enclosure: ODP
Frame: 56C
Frame Material: Steel
Output @ Frequency: .330 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: .700 A @ 460.0 V

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: P
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3410M
Mounting Arrangement: F1
Power Factor: 64
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

1.400 A @ 230.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: KM3006 - .33HP,3450RPM,3PH,60HZ,56C,3410M,OPEN,F1

1.600 A @ 208.0 V
Design Code: B
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor

Page 3 of 10