Baldor JSL725A Product Information Sheet

Product Information Packet

JSL725A

2HP,3450RPM,1PH,60HZ,3528L,N

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JSL725A - 2HP,3450RPM,1PH,60HZ,3528L,N

Part Detail

Revision: N Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGL467 CD Diagram: CD0203 Mfg Plant:
Mech. Spec: 35E2011 Layout: 35LYE2011 Poles: 02 Created Date: 01-26-2016
Base: N Eff. Date: 06-13-2019 Leads: 4#14 A&J,1#18 B PH,1#12 #1TH

Specs

Catalog Number: JSL725A
Enclosure: OPSB
Frame: 56YZ
Frame Material: Steel
Output @ Frequency: 2.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ

115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 14 AWG, A&J
Motor Lead Exit: Terminal Panel
Motor Lead Termination: None
Motor Type: 3528L
Mounting Arrangement: F1
Power Factor: 81
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Pool Pump
Pulley Shaft Indicator: Ext Thread & Tapped Hole
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End

Current @ Voltage: 11.000 A @ 230.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: JSL725A - 2HP,3450RPM,1PH,60HZ,3528L,N

13.300 A @ 208.0 V

22.000 A @ 115.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B

Shaft Rotation: Fixed Opposite Standard
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: EP
Winding Thermal 2: None

Page 3 of 10