Baldor JSL1313A Product Information Sheet

Product Information Packet

JSL1313A

1.5HP,3450RPM,1PH,60HZ,56YZ,3432LC,OPEN

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JSL1313A - 1.5HP,3450RPM,1PH,60HZ,56YZ,3432LC,OPEN

Part Detail

Revision: U Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGX598 CD Diagram: CD0769 Mfg Plant:
Mech. Spec: 34H242 Layout: 34LYH242 Poles: 02 Created Date:
Base: N Eff. Date: 09-23-2015 Leads: 4#16 A&J,1#18 B PH,1#14 #1TH

Specs

Catalog Number: JSL1313A
Frame: 56YZ
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 13.000 A @ 115.0 V

6.500 A @ 230.0 V

KVA Code: H
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 16 AWG, A&J
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: Flying Leads
Motor Type: 3432LC
Mounting Arrangement: F1
Power Factor: 95
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Pool Pump
Pulley Shaft Indicator: Ext Thread & Tapped Hole
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Drip Cover: Drip Cover

Shaft Rotation: Fixed Opposite Standard

Page 2 of 10

Product Information Packet: JSL1313A - 1.5HP,3450RPM,1PH,60HZ,56YZ,3432LC,OPEN

Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB

Page 3 of 10