Baldor JSL1306A Product Information Sheet

Product Information Packet

JSL1306A

.75HP,3450RPM,1PH,60HZ,56Y,3424L,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JSL1306A - .75HP,3450RPM,1PH,60HZ,56Y,3424L,OPEN,F1

Part Detail

Revision: S Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WG2414 CD Diagram: CD0203 Mfg Plant:
Mech. Spec: 34H331 Layout: 34LYH331 Poles: 02 Created Date:
Base: N Eff. Date: 07-03-2018 Leads: 5#18,1#14 #1TH

Specs

Catalog Number: JSL1306A
Frame: 56Y
Frame Material: Steel
Output @ Frequency: .750 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 5.500 A @ 230.0 V

11.000 A @ 115.0 V

KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 5 @ 18 AWG
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: Flying Leads
Motor Type: 3424L
Mounting Arrangement: F1
Power Factor: 68
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Pool Pump
Pulley Shaft Indicator: Ext Thread & Tapped Hole
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Design Code: N

Shaft Rotation: Fixed Opposite Standard

Page 2 of 10

Product Information Packet: JSL1306A - .75HP,3450RPM,1PH,60HZ,56Y,3424L,OPEN,F1

Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: ES

Page 3 of 10