![](/html/b0/b0a8/b0a86d74a625ff49b4d606c4b2ef7871ed36920b75501d6f11b75b9d8135bee9/bg1.png)
Product Information Packet
JPM2547T
60HP,1770RPM,3PH,60HZ,364JP,4252M,OPSB
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
![](/html/b0/b0a8/b0a86d74a625ff49b4d606c4b2ef7871ed36920b75501d6f11b75b9d8135bee9/bg2.png)
Product Information Packet: JPM2547T - 60HP,1770RPM,3PH,60HZ,364JP,4252M,OPSB
Part Detail
Revision: W Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 42WGW390 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 42G038 Layout: 42LYG038 Poles: 04 Created Date:
Base: RG Eff. Date: 03-08-2016 Leads: 9#6
Specs
Catalog Number: JPM2547T
Enclosure: ODP
Frame: 364JP
Output @ Frequency: 60.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
460.0 V @ 60 HZ
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: RG
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 144.000 A @ 230.0 V
154.000 A @ 208.0 V
72.000 A @ 460.0 V
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 6 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 4252M
Mounting Arrangement: F1
Power Factor: 83
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: Included
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Design Code: B
Shaft Rotation: Reversible
Page 2 of 10
![](/html/b0/b0a8/b0a86d74a625ff49b4d606c4b2ef7871ed36920b75501d6f11b75b9d8135bee9/bg3.png)
Product Information Packet: JPM2547T - 60HP,1770RPM,3PH,60HZ,364JP,4252M,OPSB
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10