Baldor JPM2515T Product Information Sheet

Product Information Packet

JPM2515T

20HP,1760RPM,3PH,60HZ,256JP,3760M,OPSB,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JPM2515T - 20HP,1760RPM,3PH,60HZ,256JP,3760M,OPSB,F

Part Detail

Revision: J Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGR292 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37J644 Layout: 37LYJ644 Poles: 04 Created Date: 05-16-2012
Base: RG Eff. Date: 03-08-2016 Leads: 9#12

Specs

Catalog Number: JPM2515T
Enclosure: ODP
Frame: 256JP
Frame Material: Steel
Output @ Frequency: 20.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: RG
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: F
Inverter Code: Not Inverter
KVA Code: E
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 12 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3760M
Mounting Arrangement: F1
Power Factor: 82
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: Included
Shaft Extension Location: Pulley End

Current @ Voltage: 24.800 A @ 460.0 V

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: JPM2515T - 20HP,1760RPM,3PH,60HZ,256JP,3760M,OPSB,F

49.600 A @ 230.0 V

50.000 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10