Baldor JPL1511T Product Information Sheet

Product Information Packet

JPL1511T

10HP,3450RPM,1PH,60HZ,215JP,3740L,OPEN

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JPL1511T - 10HP,3450RPM,1PH,60HZ,215JP,3740L,OPEN

Part Detail

Revision: AY Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGX047 CD Diagram: CD0017A01 Mfg Plant:
Mech. Spec: 37E285 Layout: 37LYE285 Poles: 02 Created Date:
Base: RG Eff. Date: 07-18-2019 Leads: 2#8 A PH,2#14 B PH

Specs

Catalog Number: JPL1511T
Enclosure: OPEN
Frame: 215JP
Frame Material: Steel
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 46.000 A @ 230.0 V

Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 2 @ 8 AWG, A PH
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3740L
Mounting Arrangement: F1
Power Factor: 86
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: Included
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

48.000 A @ 208.0 V

Shaft Rotation: Reversible

Page 2 of 10

Product Information Packet: JPL1511T - 10HP,3450RPM,1PH,60HZ,215JP,3740L,OPEN

Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10