Baldor JPL1510T Product Information Sheet
Product Information Packet
JPL1510T
7.5HP,1725RPM,1PH,60HZ,215JP,3744LC,OPEN
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: JPL1510T - 7.5HP,1725RPM,1PH,60HZ,215JP,3744LC,OPEN
Part Detail
Revision: J Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGW885 CD Diagram: CD0017A02 Mfg Plant:
Mech. Spec: 37M341 Layout: 37LYM341 Poles: 04 Created Date: 03-04-2010
Base: RG Eff. Date: 07-19-2019 Leads: 2#10 A PH,2#14 B PH
Specs
Catalog Number: JPL1510T
Enclosure: OPEN
Frame: 215JP
Frame Material: Steel
Output @ Frequency: 7.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 31.000 A @ 230.0 V
Inverter Code: Not Inverter
KVA Code: G
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 2 @ 10 AWG, A PH
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3744LC
Mounting Arrangement: F1
Power Factor: 89
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: Included
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
33.000 A @ 208.0 V
Shaft Rotation: Reversible
Page 2 of 10
Product Information Packet: JPL1510T - 7.5HP,1725RPM,1PH,60HZ,215JP,3744LC,OPEN
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...