Baldor JPL1409T Product Information Sheet
Product Information Packet
JPL1409T
5HP,3500RPM,1PH,60HZ,184,JP,3634LC,OPEN
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: JPL1409T - 5HP,3500RPM,1PH,60HZ,184,JP,3634LC,OPEN
Part Detail
Revision: N Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGW925 CD Diagram: CD0017A02 Mfg Plant:
Mech. Spec: 36E774 Layout: 36LYE774 Poles: 02 Created Date: 11-10-2005
Base: RG Eff. Date: 01-30-2020 Leads: 2#12 A PH,2#16 B PH
Specs
Catalog Number: JPL1409T
Enclosure: OPEN
Frame: 184JP
Frame Material: Steel
Output @ Frequency: 5.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 21.500 A @ 230.0 V
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 2 @ 12 AWG, A PH
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3634LC
Mounting Arrangement: F1
Power Factor: 96
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: Included
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
23.000 A @ 208.0 V
Shaft Rotation: Reversible
Page 2 of 10
Product Information Packet: JPL1409T - 5HP,3500RPM,1PH,60HZ,184,JP,3634LC,OPEN
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
Page 3 of 10
Loading...