Baldor JMWDM3713T Product Information Sheet

Product Information Packet

JMWDM3713T

15HP,3450RPM,3PH,60HZ,215JM,3750M,TEFC,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JMWDM3713T - 15HP,3450RPM,3PH,60HZ,215JM,3750M,TEFC,F

Part Detail

Revision: P Status: NLA/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGY719 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37H883 Layout: 37LYH883 Poles: 02 Created Date: 04-23-2012
Base: RG Eff. Date: 01-12-2018 Leads: 9#14

Specs

Catalog Number: JMWDM3713T
Enclosure: TEFC
Frame: 215JM
Frame Material: Steel
Output @ Frequency: 15.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 208.0 V @ 60 HZ

230.0 V @ 60 HZ

460.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
KVA Code: K
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3750M
Mounting Arrangement: F1
Power Factor: 91
Product Family: Wash Down
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: JMWDM3713T - 15HP,3450RPM,3PH,60HZ,215JM,3750M,TEFC,F

Current @ Voltage: 17.000 A @ 460.0 V

34.000 A @ 230.0 V

37.500 A @ 208.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Thermistor
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10