Baldor JMM7074T Product Information Sheet

Product Information Packet

JMM7074T

10HP,3500RPM,3PH,60HZ,215JM,3732M,XPFC,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JMM7074T - 10HP,3500RPM,3PH,60HZ,215JM,3732M,XPFC,F

Part Detail

Revision: L Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGR406 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 37R081 Layout: 37LYR081 Poles: 02 Created Date: 10-05-2012
Base: RG Eff. Date: 02-04-2019 Leads: 9#14

Specs

Catalog Number: JMM7074T
Enclosure: XPFC
Frame: 215JM
Frame Material: Steel
Output @ Frequency: 10.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: CLI GP D
XP Division: Division I
Agency Approvals: UL

UR
CSA EEV

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 14 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3731M
Mounting Arrangement: F1
Power Factor: 86
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None
Shaft Extension Location: Pulley End

Bearing Grease Type: Polyrex EM (-20F +300F)

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: JMM7074T - 10HP,3500RPM,3PH,60HZ,215JM,3732M,XPFC,F

Blower: None
Current @ Voltage: 12.000 A @ 460.0 V

24.000 A @ 230.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T2C

Page 3 of 10