Baldor JMFSWDM3713T-E Product Information Sheet

Product Information Packet

JMFSWDM3713T-E

15HP,3500RPM,3PH,60HZ,213JM,3756M,TEFC,F

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JMFSWDM3713T-E - 15HP,3500RPM,3PH,60HZ,213JM,3756M,TEFC,F

Part Detail

Revision: G Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 37WGR515 CD Diagram: CD0180 Mfg Plant:
Mech. Spec: 37Q257 Layout: 37LYQ257 Poles: 02 Created Date: 04-10-2018
Base: RG Eff. Date: 04-23-2020 Leads: 9#14,0#0 dbl dip & bake,0#0 phase insulate,0#0 CD0180 & Y

Specs

Catalog Number: JMFSWDM3713T-E
Enclosure: TEFC
Frame: 213JM
Frame Material: Stainless Steel
Output @ Frequency: 15.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA EEV

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: H
Inverter Code: Not Inverter
KVA Code: L
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: @ 0 AWG

9 @ 14 AWG
Motor Lead Termination: Flying Leads
Motor Type: 3756M
Mounting Arrangement: F1
Power Factor: 90
Product Family: WD All SS Encapsulated
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Blower: None

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: JMFSWDM3713T-E - 15HP,3500RPM,3PH,60HZ,213JM,3756M,TEFC,F

Current @ Voltage: 17.000 A @ 460.0 V

34.000 A @ 230.0 V

37.000 A @ 208.0 V
Design Code: A
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10