Baldor JMFSWDM3611T-E Product Information Sheet

Product Information Packet

JMFSWDM3611T-E

3HP,1760RPM,3PH,60HZ,182JM,3636M,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JMFSWDM3611T-E - 3HP,1760RPM,3PH,60HZ,182JM,3636M,TEFC,F1

Part Detail

Revision: J Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 36WGS987 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 36R563 Layout: 36LYR563 Poles: 04 Created Date: 08-17-2017
Base: RG Eff. Date: 01-22-2020 Leads: 9#16

Specs

Catalog Number: JMFSWDM3611T-E
Enclosure: TEFC
Frame: 182JM
Frame Material: Stainless Steel
Output @ Frequency: 3.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: H
Inverter Code: Inverter Ready
KVA Code: K
Lifting Lugs: Standard Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 16 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3636M
Mounting Arrangement: F1
Power Factor: 76
Product Family: WD All SS Encapsulated
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Current @ Voltage: 4.200 A @ 460.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: JMFSWDM3611T-E - 3HP,1760RPM,3PH,60HZ,182JM,3636M,TEFC,F1

8.400 A @ 230.0 V

8.800 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10