Baldor JMFSWDM3550T-E Product Information Sheet

Product Information Packet

JMFSWDM3550T-E

1.5HP,3500RPM,3PH,60HZ,143JM,3532M,TENV

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JMFSWDM3550T-E - 1.5HP,3500RPM,3PH,60HZ,143JM,3532M,TENV

Part Detail

Revision: F Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGR929 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35E4762 Layout: 35LYE4762 Poles: 02 Created Date: 08-10-2017
Base: RG Eff. Date: 08-20-2019 Leads: 9#18 15" lead length,0#0 dbl dip & bake,0#0 phase insulaY

Specs

Catalog Number: JMFSWDM3550T-E
Enclosure: TENV
Frame: 143JM
Frame Material: Stainless Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Inverter Ready
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Finish: UNPAINTED
Motor Lead Quantity/Wire Size: @ 0 AWG

9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3532M
Mounting Arrangement: F1
Power Factor: 90
Product Family: WD All SS Encapsulated
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Tapped & Key
Rodent Screen: None

Current @ Voltage: 1.800 A @ 460.0 V

RoHS Status: ROHS COMPLIANT

Page 2 of 10

Product Information Packet: JMFSWDM3550T-E - 1.5HP,3500RPM,3PH,60HZ,143JM,3532M,TENV

3.600 A @ 230.0 V

3.700 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: H

Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10