Baldor JM7013 Product Information Sheet

Product Information Packet

JM7013

1HP,3450RPM,3PH,60HZ,56J,X3416M,XPFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JM7013 - 1HP,3450RPM,3PH,60HZ,56J,X3416M,XPFC,F1

Part Detail

Revision: AK Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WG0282 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 34-5588 Layout: 34LY5588 Poles: 02 Created Date:
Base: N Eff. Date: 03-08-2016 Leads: 9#18

Specs

Catalog Number: JM7013
Enclosure: TEFC
Frame: 56J
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: CLI GP D; CLII GP F,G
XP Division: Division I
Agency Approvals: CSA

UL
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: N
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3416M
Mounting Arrangement: F1
Power Factor: 71
Product Family: Hazardous Location Motor
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Ext Thread
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Current @ Voltage: 1.800 A @ 460.0 V

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: JM7013 - 1HP,3450RPM,3PH,60HZ,56J,X3416M,XPFC,F1

3.600 A @ 230.0 V

4.100 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
XP Temp Code: T3C

Page 3 of 10