Baldor JL825A Product Information Sheet
Product Information Packet
JL825A
3HP,3450RPM,1PH,60HZ,56J,1935LC,OPEN,F1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: JL825A - 3HP,3450RPM,1PH,60HZ,56J,1935LC,OPEN,F1
Part Detail
Revision: U Status: NLA/A Change #: Proprietary: No
Type: AC Elec. Spec: 19WGW048 CD Diagram: CD0661 Mfg Plant:
Mech. Spec: 19B107 Layout: 19LYB107 Poles: 02 Created Date: 06-26-2007
Base: N Eff. Date: 03-17-2010 Leads: 2#14 A PH,2#18 B&J
Specs
Catalog Number: JL825A
Frame: 56J
Frame Material: Steel
Output @ Frequency: 3.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
Agency Approvals: CE
CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 13.000 A @ 230.0 V
15.900 A @ 208.0 V
Design Code: L
KVA Code: K
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 2 @ 14 AWG, A PH
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: None
Motor Type: 1935LC
Mounting Arrangement: F1
Power Factor: 93
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Ext Thread
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Fixed Opposite Standard
Drip Cover: Drip Cover
Shaft Slinger Indicator: No Slinger
Page 2 of 10
Product Information Packet: JL825A - 3HP,3450RPM,1PH,60HZ,56J,1935LC,OPEN,F1
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Terminal Panel
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None
Page 3 of 10
Loading...