Baldor JL5030 Product Information Sheet

Product Information Packet

JL5030

1.5HP,3450RPM,1PH,60HZ,56J,X3528L,XPFC

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JL5030 - 1.5HP,3450RPM,1PH,60HZ,56J,X3528L,XPFC

Part Detail

Revision: AS Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WG0199 CD Diagram: CD0001 Mfg Plant:
Mech. Spec: 35E790 Layout: 35LYE790 Poles: 02 Created Date: 06-27-2007
Base: N Eff. Date: 01-09-2020 Leads: 4#16 A PH,2#18 B PH

Specs

Catalog Number: JL5030
Enclosure: XPFC
Frame: 56J
Frame Material: Steel
Output @ Frequency: 1.500 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

208.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: CLI GP D; CLII GP F,G
XP Division: Division I
Agency Approvals: UL

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)

Insulation Class: B
Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 16 AWG, A PH
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: X3528L
Mounting Arrangement: F1
Power Factor: 82
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Ext Thread
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Blower: None

Shaft Extension Location: Pulley End

Page 2 of 10

Product Information Packet: JL5030 - 1.5HP,3450RPM,1PH,60HZ,56J,X3528L,XPFC

Current @ Voltage: 15.000 A @ 115.0 V

7.500 A @ 230.0 V

7.900 A @ 208.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater

Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Normally Closed Thermostat
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None
XP Temp Code: T3C

Page 3 of 10