Baldor JL3516A Product Information Sheet

Product Information Packet

JL3516A

2HP,1725RPM,1PH,60HZ,56J,3535LC,TEFC,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JL3516A - 2HP,1725RPM,1PH,60HZ,56J,3535LC,TEFC,F1

Part Detail

Revision: Y Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGT490 CD Diagram: CD0308 Mfg Plant:
Mech. Spec: 35N778 Layout: 35LYN778 Poles: 04 Created Date:
Base: N Eff. Date: 03-08-2018 Leads: 4#14 A&J,1#12 #4TH Y

Specs

Catalog Number: JL3516A
Enclosure: TEFC
Frame: 56J
Frame Material: Steel
Output @ Frequency: 2.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 14 AWG, A&J
Motor Lead Exit: Ko Box
Motor Lead Termination: Flying Leads
Motor Type: 3535LC
Mounting Arrangement: F1
Power Factor: 99
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Ext Thread
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Current @ Voltage: 17.200 A @ 115.0 V

Shaft Rotation: Fixed Opposite Standard

Page 2 of 10

Product Information Packet: JL3516A - 2HP,1725RPM,1PH,60HZ,56J,3535LC,TEFC,F1

8.600 A @ 230.0 V
Design Code: L
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Standard
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: F

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: Do Not Use Eve-Not Valiid
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: KO
Winding Thermal 2: None

Page 3 of 10