Product Information Packet
JL1309A
1HP,3450RPM,1PH,60HZ,56J,3428L,OPEN,F1,N
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: JL1309A - 1HP,3450RPM,1PH,60HZ,56J,3428L,OPEN,F1,N
Part Detail
Revision: L Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WG3375 CD Diagram: CD0449 Mfg Plant:
Mech. Spec: 34F156 Layout: 34LYF156 Poles: 02 Created Date: 02-18-2010
Base: N Eff. Date: 08-27-2018 Leads: 4#16 A&J,1#14 #4TH
Specs
Catalog Number: JL1309A
Enclosure: OPEN
Frame: 56J
Frame Material: Steel
Output @ Frequency: 1.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 230.0 V @ 60 HZ
115.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: CSA
UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Inverter Code: Not Inverter
KVA Code: L
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 4 @ 16 AWG, A&J
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: Flying Leads
Motor Type: 3428L
Mounting Arrangement: F1
Power Factor: 65
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: C-Face
Pulley Shaft Indicator: Ext Thread
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Current @ Voltage: 14.000 A @ 115.0 V
Shaft Ground Indicator: No Shaft Grounding
Page 2 of 10
Product Information Packet: JL1309A - 1HP,3450RPM,1PH,60HZ,56J,3428L,OPEN,F1,N
7.000 A @ 230.0 V
8.800 A @ 208.0 V
Design Code: N
Drip Cover: Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Drip Cover Mounting
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Shaft Rotation: Fixed Opposite Standard
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None
Page 3 of 10
Loading...