Baldor JEWDM3559 Product Information Sheet

Product Information Packet

JEWDM3559

3HP,3450RPM,3PH,60HZ,56J,3540M,TEFC,F1,N

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: JEWDM3559 - 3HP,3450RPM,3PH,60HZ,56J,3540M,TEFC,F1,N

Part Detail

Revision: H Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 35WGQ130 CD Diagram: CD0005 Mfg Plant:
Mech. Spec: 35E2235 Layout: 35LYE2235 Poles: 02 Created Date: 07-01-2015
Base: N Eff. Date: 03-10-2020 Leads: 9#18

Specs

Catalog Number: JEWDM3559
Enclosure: TEFC
Frame: 56J
Frame Material: Steel
Output @ Frequency: 3.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

208.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA EEV

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: No Mounting

Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Inverter Ready
KVA Code: M
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: Locked Bearing
Motor Lead Quantity/Wire Size: 9 @ 18 AWG
Motor Lead Termination: Flying Leads
Motor Type: 3540M
Mounting Arrangement: F1
Power Factor: 92
Product Family: Wash Down
Pulley End Bearing Type: Sealed Bearing
Pulley Face Code: C-Face
Pulley Shaft Indicator: Ext Thread
Rodent Screen: None
RoHS Status: ROHS COMPLIANT

Bearing Grease Type: Polyrex EM (-20F +300F)

Shaft Ground Indicator: No Shaft Grounding

Page 2 of 10

Product Information Packet: JEWDM3559 - 3HP,3450RPM,3PH,60HZ,56J,3540M,TEFC,F1,N

Blower: None
Current @ Voltage: 3.500 A @ 460.0 V

7.000 A @ 230.0 V

7.700 A @ 208.0 V
Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Shaft Indicator: None

Shaft Rotation: Reversible
Shaft Slinger Indicator: Shaft Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: None
Winding Thermal 2: None

Page 3 of 10