Baldor Industrial Grinders Catalog Page
Gearmotors and
Gear Products
Industrial Grinders
12 Inch
Grinders
PT Components Motor
Accessories
Grinders
Gearmotors
14 Inch
Servo Motors
and Controls
BALDOR
Catalog #1215W
with #GA20 Pedestal
Cast iron tool rests & exhaust type wheel guards. Manual starter with overload
protection. Also includes lighted eyeshield (bulb not included). All three-phase units
are suitable for 50/60 Hz, 1500/1800 RPM operation. Wheels sold separately. See
chart below.
Hp RPM
2 1800 12”X2”X1-1/4” 1215W 2,584 G1 253 208-230/460 Grinder UR k
3 1800 12”X2”X1-1/4” 1216W 2,676 G1 254 208-230/460 Grinder UR k
2 1800 12”X2”X1-1/4” 1217W 2,737 G1 259 115/230 Grinder UR
3 1800 12”X2”X1-1/4” 129W 2,676 G1 256 575 Grinder UR i
Wheel
Size
Catalog
Number
List
Price
Mult.
Sym.
Shpg.
Wgt.
Voltage Style
Agency
Approval
Notes
J
Cast iron tool rests & exhaust type wheel guards. Magnetic starter with overload
protection. Also includes lighted eyeshields (bulbs not included). Suitable for 50/60
Hz operation. Wheels sold separately. See chart below.
Hp RPM
5 1800 14”X3”X1-1/4” 1406W 3,316 G1 359 230 Grinder UR m
5 1800 14”X3”X1-1/4” 1410W 3,316 G1 362 460 Grinder UR m
5 1800 14”X3”X1-1/4” 1408W 3,316 G1 358 575 Grinder UR m
7-1/2 1800 14”X3”X1-1/4” 1407W 3,617 G1 372 230 Grinder UR m
7-1/2 1800 14”X3”X1-1/4” 1411W 3,617 G1 381 460 Grinder UR m
7-1/2 1800 14”X3”X1-1/4” 1409W 3,617 G1 374 575 Grinder UR m
Wheel
Size
Catalog
Number
List
Price
Mult.
Sym.
Shpg.
Wgt.
Voltage Style
Agency
Approval
Notes
Mod Express
Baldor Education
Workshop
and Sales Offices
Classifications
EISA Compliance
Table & Index
462
BALDOR
Catalog #1407W
with #GA20 Pedestal
Wheels for 12-Inch and 14-Inch Grinders
High quality aluminum oxide and silicon abrasive in a premium vitrified system
Catalog
Number
B125 197 A8 12” 2” 1-1/4” 30 22
B126 199 A8 12” 2” 1-1/4” 46 22
B147 373 A8 14” 3” 1-1/4” 30 42
B148 373 A8 14” 3” 1-1/4” 46 41
NOTE: When installing new wheels, check wheels for possible damage. Do not use a damaged wheel.
With new wheel installed, all safety guards in place and operator standing away from front of grinder, run
grinder for one minute before apply work. (Wear safety glasses). Exercise caution.
Designed to comply with OSHA standards under normal usage.
NOTES:
(i) 575 volt, 50//60 Hz.
J) Factory connected for 115 volts, no power cord.
(
(k) Factory connected for 230, manual starter, specify voltage when ordering.
(m) Factory connected for 230, magnetic starter must be changed for other voltages
List
Price
Mult.
Sym.
Diameter Face Bore Grit
Shpg.
Wgt.
Loading...